CONTROLS
48V Phantom Power ON/OFF with ‘soft start’ feature to avoid thumps
INST/DI CH 1&2 only. Selects jack instrument input with input impedance > 1MOhm
-20dB 20dB Pad (CH1&2 ONLY)
LINE Selects Line level input with input impedance of 10kOhm
Polarity Polarity invert
Filter Selects 12dB/octave Hi-Pass filter – range 25Hz to 250Hz
PK Indicates signal levels within 4dB of clipping
SIG Indicates signal levels above -25dBu
I/P Z Input impedance select 200/1200/5000 ohms
GAIN MIC/DI 0 to 60dB. LINE -20 to 40dB
Sample Rate Selectable 44.1/48/88.2/96 kHz
Dither Selectable 16/20/24 bit

INTERFACES

MIC Input Electronically balanced XLR with variable input impedance
LINE Input Electronically balanced 25 pin D wired to DA88 standard
INST/DI Input Unbalanced front panel mounted jack
LINE Output Electronically balanced 25 pin D wired to DA88 standard
Digital output Optional 48/96kHz AES, S/PDIF and 48kHz ADAT light-pipe.
Ext Word Clock BNC

PERFORMANCE

Maximum input/output level +21.5dBu
THD Typically better than 0.007% at 1kHz any gain setting
EIN Better than -127.5dB @ 60dB gain/ref 150 Ohms
Frequency Response -0.3dB @10Hz to -3dB @300kHz at unity gain
CMRR Better than 75dB at 1kHz and 60dB gain
Dimensions 480mm x 278mm x 44mm
Weight 4.5Kg
Power consumption 40 watts